Worx WA0177 boundary wire for Landroid lawnmower robot meter

Article No.: WORX-B
Worx WA0177 boundary wire for Landroid lawnmower robot meter
Worx WA0177 boundary wire for Landroid lawnmower robot meter
Article No.: WORX-B
Out of stock
0.69

The Worx WA0177 boundary wire fits the lawnmower robots of the Landroid series. Specifically used for WG794E and WG795E.1.

Optimal mowing without obstacles
The boundary wire creates a magnetic field, which controls the lawnmower robot and changes it all to pass through the cable. In this way, the optimal mowing result can also be created at the edge of the lawn. Depending on the boundary object, the cable must be laid at different distances. Along garden paths or terraces at a distance of 5-10 cm so that a robot can go all the way to the edge of the lawn and not leave a rim. In the case of bushes, beds or walls, larger, approx. Keep a distance of 30-35 cm. Especially garden ponds and larger obstacles such as trees if this boundary wire is optimal. The lawnmower robot can work without interruption and you do not have to worry about possible collisions or damage.

Flexible cable You can lay it on the ground or even in the ground as required. Initially, it is easier to lay on the ground surface. In this way, they can be easily repaired in this way, and the route of the boundary can be changed at any time. The boundary can be laid in the ground inside the line. Here, everyone should take into account that the cable should not be dug deeper than 20 cm for a lawn mower robot to detect the signal. For both installations, it is important that the boundary wires do not cross each other.